Yealink SIP-T2 Series Provisioning Manual page 17

Getting Started
######################################################
## OpenVPN ##
######################################################
network.vpn_enable =
openvpn.url =
######################################################
## LLDP ##
######################################################
network.lldp.enable =
network.lldp.packet_interval =
MAC-Oriented CFG file contains configuration parameters which are expected to be
updated per phone, such as the registration information.
The following figure shows a portion of the MAC-Oriented CFG file:
The partial parameters in the MAC-Oriented CFG file are described as follows:
####################################################
## MAC-Oriented CFG File ##
####################################################
#!version:1.0.0.1
##File header "#!version:1.0.0.1" cannot be edited or deleted, and must be placed in
the first line. This template file is applicable to SIP-T28P/T26P/T22P/T20P IP phones running
firmware version 72 or later. For more information on configuration parameters, refer to
Yealink_SIP-T2_Series_IP_Phones_Auto_Provisioning_Guide. ##
7