Yealink SIP-T2 Series Provisioning Manual page 21

Getting Started
######################################################
## Account4 Basic Settings (except SIP-T20P Model) ##
######################################################
account.4.enable =
account.4.label =
account.4.display_name =
account.4.auth_name =
account.4.user_name =
account.4.password =
account.4.outbound_proxy_enable =
account.4.outbound_host =
account.4.outbound_port =
account.4.sip_listen_port =
account.4.transport =
######################################################
## Failback ##
######################################################
account.4.reregister_enable =
account.4.naptr_build =
account.4.fallback.redundancy_type =
account.4.fallback.timeout =
account.4.sip_server.1.address =
account.4.sip_server.1.port =
account.4.sip_server.1.expires =
account.4.sip_server.1.retry_counts =
account.4.sip_server.1.failback_mode =
account.4.sip_server.1.failback_timeout =
account.4.sip_server.1.register_on_enable =
account.4.sip_server.2.address =
account.4.sip_server.2.port =
account.4.sip_server.2.expires =
account.4.sip_server.2.retry_counts =
account.4.sip_server.2.failback_mode =
account.4.sip_server.2.failback_timeout =
account.4.sip_server.2.register_on_enable =
11