Yealink SIP-T2 Series Provisioning Manual page 221

Permitted
Parameter
Values
account.X.sup
ervisor_info_c
ode_name.Y
=
(SIP-T28: X
ranges from 1
to 6.
String within
SIP-T26P/T22P: 99
X ranges from characters
1 to 3.
SIP-T20P: X
ranges from 1
to 2.
Y ranges from
1 to 100)
account.X.call
_center.queue
_status_enabl
e =
(SIP-T28: X
ranges from 1
to 6.
0 or 1
SIP-T26P/T22P:
X ranges from
1 to 3.
SIP-T20P: X
ranges from 1
to 2)
account.X.call
_center.queue
_status_light_e
nable =
(SIP-T28: X
ranges from 1 0 or 1
to 6.
SIP-T26P/T22P:
X ranges from
1 to 3.
SIP-T20P: X
Descriptions
It configures the supervisor name for
account X.
The value Y must be continuous.
The default value is blank.
It enables or disables the queue status
notification feature for account X.
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the power
indicator LED to flash when the ACD
call queue has reached the maximum
number of calls for account X.
0-Disabled (power indicator LED does
not flash)
1-Enabled (power indicator LED fast
flashes (300ms) green)
If it is set to 0, the status of the power
indicator LED is determined by the
value of the parameter
Appendix
Web Setting Path
211