Yealink SIP-T2 Series Provisioning Manual page 148

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
=
(X ranges
from 1 to 10)
dialplan.dialn
String within
ow.rule.X =
(X ranges
characters
from 1 to 100)
dialplan.dialn
ow.line_id.X =
(X ranges
from 1 to 100)
URL within
dialplan_dialn
ow.url =
characters
phone_setting
Integer from
.dialnow_dela
y =
dialplan.repla
String within
ce.prefix.X =
(X ranges
characters
from 1 to 100)
dialplan.repla String within
ce.replace.X
= characters
138
Values
0 to 6 (for SIP-T28P)
0 to 3 (for SIP-T26P/T22P)
0 to 2 (for SIP-T20P)
Multiple line IDs are separated by
commas. 0 stands for all lines.
If it is left blank, the block out rule will
apply to all accounts on the phone.
The default value is blank.
It configures the dial now rule.
511
The default value is blank.
It configures lines applying the
dial-now rule.
0 to 6 (for SIP-T28P)
0 to 3 (for SIP-T26P/T22P)
0 to 2 (for SIP-T20P)
Integer
Multiple line IDs are separated by
commas. 0 stands for all lines.
If it is left blank, the dial-now rule will
apply to all accounts on the phone.
The default value is blank.
It configures the access URL of the
dial-now rule file.
511
The default value is blank.
It configures the delay time (in
seconds) for the dial-now rule.
1 to 14
The default value is 1.
It configures the entered number to be
replaced.
32
The default value is blank.
It configures the alternate number to
replace the entered number.
32
The default value is blank.
Descriptions Web Setting Path
Out->Account
Settings->Dial
Plan->Dial-now->
Rule
Settings->Dial
Plan->Dial-now->
Account
Features->General
Information->Time-
Out for Dial-Now
Rule
Settings->Dial
Plan->Replace
Rule->Prefix
Settings->Dial
Plan->Replace
Rule->Replace