Yealink SIP-T2 Series Provisioning Manual page 163

Permitted
Parameter
Values
p_enable =
(not
applicable to
SIP-T20P IP
phones)
features.picku String within
p.group_picku 32
p_code = characters
features.picku
p.direct_picku
p_enable =
0 or 1
(not
applicable to
SIP-T20P IP
phones)
features.picku String within
p.direct_picku 32
p_code = characters
features.picku
p.blf_visual_e
nable =
0 or 1
(not
applicable to
SIP-T20P IP
phones)
features.picku
p.blf_audio_e 0 or 1
nable =
features.blf_le
0, 1, 2 or 3
d_mode =
Descriptions
phone is in the pre-dialing screen.
0-Disabled
1-Enabled
The default value is 0.
It configures the group call pickup
code.
The default value is blank.
It enables or disables the phone to
display the DPickup soft key when the
phone is in the pre-dialing screen.
0-Disabled
1-Enabled
The default value is 0.
It configures the directed call pickup
code.
The default value is blank.
It enables or disables the phone to
display a visual alert when the
monitored user receives an incoming
call.
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the phone to
play an audio alert when the
monitored user receives an incoming
call.
0-Disabled
1-Enabled
The default value is 0.
It configures BLF LED mode and
provides four kinds of definition for the
BLF/BLF list key LED status.
For more information, refer to
Mode on page 218.
Web Setting Path
Call Pickup
Features->Call
Pickup->Group
Call Pickup Code
Features->Call
Pickup->Directed
Call Pickup
Features->Call
Pickup->Directed
Call Pickup Code
Features->Call
Pickup->Visual
Alert for BLF Pickup
Features->Call
Pickup->Audio
Alert for BLF Pickup
Features->General
Information->BLF
LED Mode
BLF LED
Appendix
153