Yealink SIP-T2 Series Provisioning Manual page 92

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
network.intern
et_port.mask
=
network.intern
et_port.gatew IPv4 address
ay =
network.prima
IPv4 address
ry_dns =
network.secon
IPv4 address
dary_dns =
String within
network.pppo
e.user =
characters
String within
network.pppo
e.password =
characters
82
Values
It configures the IPv4 subnet mask
when the IP address mode is
configured as IPv4 or IPv4&IPv6, and
Subnet
the Internet (WAN) port type for IPv4 is
Mask
configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
It configures the IPv4 default gateway
when the IP address mode is
configured as IPv4 or IPv4&IPv6, and
the Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
It configures the primary IPv4 DNS
server when the IP address mode is
configured as IPv4 or IPv4&IPv6, and
the Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
It configures the secondary IPv4 DNS
server when the IP address mode is
configured as IPv4 or IPv4&IPv6, and
the Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
It configures the user name for PPPoE
connection.
32
The default value is blank.
It takes effect after a reboot.
It configures the password for PPPoE
connection.
99
The default value is blank.
It takes effect after a reboot.
Descriptions Web Setting Path
Network->Basic->
IPv4 Config->Static
IP Address->
Subnet Mask
Network->Basic->
IPv4 Config->Static
IP Address->
Gateway
Network->Basic->
IPv4 Config->Static
IP Address->
Primary DNS
Network->Basic->
IPv4 Config->Static
IP Address->
Secondary DNS
Network->Basic->
IPv4 Config->
PPPoE->User
Name
Network->Basic->
IPv4 Config->
PPPoE->Password