Yealink SIP-T2 Series Provisioning Manual page 108

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
assword =
transfer.semi_
attend_tran_e
nable =
transfer.blind_
tran_on_hook_
enable =
transfer.on_ho
ok_trans_ena
ble =
transfer.dsske
y_deal_type =
transfer.multi_
call_trans_ena
ble =
(not
applicable to
SIP-T20P IP
98
Values
The default value is blank.
It enables or disables the transferee
party's phone to prompt a missed call
on the LCD screen before displaying
the caller ID when performing a
0 or 1
semi-attended transfer.
0-Enabled
1-Disabled
The default value is 1.
It enables or disables the phone to
complete the blind transfer through
on-hook.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
It enables or disables the phone to
complete the attended transfer
through on-hook.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
It configures the DSS key behavior
during an active call when user
presses the DSS key and the DSS key is
configured as a speed dial, transfer or
BLF/BLF list key.
0, 1 or 2
0-New Call
1-Attended Transfer
2-Blind Transfer
The default value is 2.
It enables or disables the phone to
enter Transfer to menu during multiple
calls when pressing the transfer soft
0 or 1
key or TRAN key.
0-Disabled
Descriptions Web Setting Path
Features->Transfer
->Semi-Attended
Transfer
Features->Transfer
->Blind Transfer On
Hook
Features->Transfer
->Attended
Transfer On Hook
Features->Transfer
->Transfer Mode
Via Dsskey
Features->General
Information->
Allow Trans Exist
Call