Yealink SIP-T2 Series Provisioning Manual page 153

Permitted
Parameter
Values
ldap.ldap_sort
=
(not
0 or 1
applicable to
SIP-T20P IP
phones)
String within
features.call_n
99
um_filter =
characters
features.dnd_r 404, 480 or
efuse_code = 486
features.norm
404, 480 or
al_refuse_cod
486
e =
features.call_c
ompletion_en 0 or 1
able =
features.fwd_
0 or 1
mode =
Descriptions
It enables or disables the phone to sort
the search results in alphabetical order
or numerical order.
0-Disabled
1-Enabled
The default value is 0.
It configures the characters the phone
filters when dialing.
If the dialed number contains
configured characters, the phone will
automatically filter these characters
when dialing.
The default value is "-,".
It configures a return code and reason
of SIP response messages when the
phone rejects an incoming call by
DND.
404-No Found
480-Temporarily not available
486-Busy here
The default value is 480.
It configures a return code and reason
of SIP response messages when the
phone rejects an incoming call.
404-No Found
480-Temporarily not available
486-Busy here
The default value is 486.
It enables or disables call completion
feature.
0-Disabled
1-Enabled
The default value is 0.
It configures the call forward mode.
0-Phone
1-Custom
Appendix
Web Setting Path
Directory->LDAP->
LDAP Sorting
Results
Features->General
Information->Call
Number Filter
Features->General
Information->
Return Code When
DND
Features->General
Information->
Return Code When
Refuse
Features->General
Information->Call
Completion
Features->
Forward&DND->Fo
rward->Mode
143