Yealink SIP-T2 Series Provisioning Manual page 113

Permitted
Parameter
Values
voice.tone.me
ssage =
(not
String
applicable to
SIP-T20P IP
phones)
voice.tone.aut
String
oanswer =
voice.group_s Integer from
pk_vol = 1 to 15
voice.ring_vol Integer from
= 1 to 15
voice.handfre Integer from
e.spk_vol = 1 to 15
voice.handset Integer from
.spk_vol = 1 to 15
voice.headset Integer from
.spk_vol = 1 to 15
Descriptions
"voice.tone.dial".
The default value is blank.
It customizes the message tone when
the parameter "voice.tone.country" is
set to Custom.
The value format is Freq/Duration. For
more information on the value format,
refer to the parameter
"voice.tone.dial".
The default value is blank.
It customizes the warning tone for auto
answer when the parameter
"voice.tone.country" is set to Custom.
The value format is Freq/Duration. For
more information on the value format,
refer to the parameter
"voice.tone.dial".
The default value is blank.
It configures the receiving volume of
the group listening mode.
The default value is 8.
It configures the volume of ringer.
The default value is 8.
It configures the receiving volume of
speaker.
The default value is 8.
It takes effect after a reboot (only for
SIP-T28P/T26P/T22P/T20P IP phones).
It configures the receiving volume of
handset.
The default value is 8.
It takes effect after a reboot (only for
SIP-T28P/T26P/T22P/T20P IP phones).
It configures the receiving volume of
headset.
The default value is 8.
Appendix
Web Setting Path
Settings->Tones->
Message
Settings->Tones->
Auto Answer
103