Yealink SIP-T2 Series Provisioning Manual page 224

Yealink IP Phones Auto provisioning Guide
The following parameters are not applicable to IP phones running firmware version 72
or later, so the description of these parameters has been deleted in this guide.
account.X.bw_acd_reason_code.Y =
account.X.dns_query_timeout=
account.X.failback_mode =
account.X.failback_timeout =
account.X.retry_counts =
acd.bw =
bw.calllog_and_dir =
bw_phonebook.server_search_enable =
directory.incoming_call_match_enable =
features.action_uri_reboot_now =
features.auto_release_bla_line =
features.dsskey_blind_tran =
features.hold_trans_delay =
features.ldap.input_type =
ldap.dial_lookup =
network.snmp.enable =
network.snmp.port =
network.snmp.trust_ip =
phone_setting.blf_list_enable =
phone_setting.sms_popup_enable =
voice.call_preview_mode=
voice.tone.record =
features.hoteling.enable =
action_url.call_interrupt =
action_url.setup_autop_finish =
features.blf_pickup_only_send_code =
214