Yealink SIP-T2 Series Provisioning Manual page 101

Permitted
Parameter
Values
name
syslog.log_lev Integer from
el = 0 to 6
auto_provision
.custom.prote 0 or 1
ct =
auto_provision
.custom.sync
0 or 1
=
Descriptions
exporting log to the syslog server.
It takes effect only if the parameter
"syslog.mode" is configured as Server.
The default value is blank.
It takes effect after a reboot.
It configures the detail level of syslog
information to be exported.
0 means nothing and 6 means all.
The default value is 3.
It takes effect after a reboot.
It enables or disables the phone to
protect personalized configuration
settings even after auto provisioning.
If it is set to 1 (Enabled), personalized
configuration settings via web/phone
user interface will be protected and
remained after auto provisioning.
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the phone to
synchronize personalized
configuration settings with the auto
provisioning server.
If it is set to 1 (Enabled), personalized
configuration settings via web/phone
user interface are saved in the
MAC-local.cfg file on the phone, and
then the phone will upload the
MAC-local.cfg file to the provisioning
server. During auto provisioning, the
phone requests to download the
MAC-local.cfg file on the provisioning
server.
0-Disabled
1-Enabled
The default value is 0.
Appendix
Web Setting Path
Server Name
Settings->
Configuration->
System Log Level
91