Yealink SIP-T2 Series Provisioning Manual page 36

Yealink IP Phones Auto provisioning Guide
enable="1" />
Where:
id_name="" specifies the directory list (id_name = "localdirectory" specifies the
local directory list). Do not edit this field.
display_name="" specifies the display name of the directory list. We recommend
you do not edit this field.
priority="" specifies the display priority of the directory list.
enable="" enables or disables the directory list for Directory.
3. Edit the values within double quotes.
4. Place this file to the provisioning server.
The following is an example of a directory template:
<root_favorite_set>
<item id_name="localdirectory" display_name="Local Directory" priority="1"
enable="1" />
<item id_name="history" display_name="History" priority="2" enable="0" />
<item id_name="remotedirectory" display_name="Remote Phone Book"
priority="3" enable="0" />
<item id_name="ldap" display_name="LDAP" priority="4" enable="0" />
</root_favorite_set>
Search source list in dialing allows the IP phone to search for entries from the desired
lists when the phone is in the dialing screen, and then the user can select the desired
entry to dial out quickly. The lists may contain Local Directory, History, Remote Phone
Book and LDAP . You can configure the search source list in dialing using the supplied
super search template (super_search.xml). After setup, place the super search template
to the provisioning server and specify the access URL in the configuration files. Search
source list in dialing is not applicable to SIP-T20P IP phones.
When editing a super search template, learn the following:
Do not rename the super search template.

<root_super_search> indicates the start of a template and </root_super_search>

indicates the end of a template.
The default display names of directory lists are Local Directory, History, Remote

Phone Book and LDAP .
When specifying the priority of search results, the valid values are 1, 2, 3 and 4. 1 is

the highest priority, 4 is the lowest.
When enabling or disabling the phone to search the desired directory list, the valid

values are 0 and 1. 0 stands for Disabled, 1 stands for Enabled.
26