Yealink SIP-T2 Series Provisioning Manual page 162

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
features.allow
_mute =
features.grou
p_listen_in_tal
king_enable =
features.ringer
_device.is_use
_headset =
features.factor
y_pwd_enabl
e =
features.expor
t_cfg_erase_p
wd =
features.picku
p.group_picku
152
Values
1-Enabled
The default value is 1.
It enables or disables the phone to
mute an active call.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It enables or disables the phone to
enter into the group listening mode by
pressing the speakerphone key when
it is in talking using the handset.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
It configures the ringer device for the
phone in the headset mode.
0-Use Speaker
0, 1 or 2
1-Use Headset
2-Use Headset & Speaker
The default value is 0.
It enables or disables the phone to
prompt for the administrator password
when you long press the OK key to
perform factory reset.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It configures the phone to export the
configuration file with what type of
password.
0-Encrypted
0 or 1
1-Blank
2-Plaintext
The default value is 1.
It enables or disables the phone to
0 or 1
display the GPickup soft key when the
Descriptions Web Setting Path
Features->General
Information->Allo
w Mute
Features->Audio-
> Ringer Device for
Headset
Features->Call
Pickup->Group