Yealink SIP-T2 Series Provisioning Manual page 60

Yealink IP Phones Auto provisioning Guide
Do one of the following operations:
Scenario Operations I:
1. Add/Edit the following parameters in the y000000000000.cfg file or
001565221229.cfg file you want the phone to download:
#Enable or disable the phone to protect personalized configuration settings even
#after auto provisioning.
#1 – personalized configuration settings via web/phone user interface will be
#protected and remained after auto provisioning;
#0 - personalized configuration settings via web/phone user interface will be
#overridden unconditionally after auto provisioning.
#The default value is 0.
auto_provision.custom.protect=1
#Enable or disable the phone to synchronize personalized configuration settings
#with the auto provisioning server.
#1 - personalized configuration settings via web/phone user interface are saved in
#the MAC-local.cfg file on the phone, and then the phone will upload the
#MAC-local.cfg file to the server. During auto provisioning, the phone requests to
#download the MAC-local.cfg file on the server;
#0 - personalized configuration settings via web/phone user interface are saved in
#the MAC-local.cfg file on the phone, but the phone will not upload the
MAC-local.cfg file to the server. The phone does not request to download the
MAC-local.cfg file on the server during auto provisioning.
#The default value is 0.
auto_provision.custom.sync=1
#Configure the access URL of the firmware file.
firmware.url = tftp://192.168.1.211/2.72.0.50.rom
2. Reboot the phone to trigger auto provisioning process. For more information on how
to trigger auto provisioning process, refer to
50
Update Mode on Page 37.