Yealink SIP-T2 Series Provisioning Manual page 94

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
network.ipv6_
primary_dns IPv6 address
=
network.ipv6_
secondary_dn IPv6 address
s =
network.bridg
e_mode =
network.pc_p
ort.enable =
network.pc_p
IP address
ort.ip =
network.pc_p
IP address
ort.mask =
84
Values
It takes effect after a reboot.
It configures the primary IPv6 DNS
server when the IP address mode is
configured as IPv6 or IPv4&IPv6, and
the Internet (WAN) port type for IPv6 is
configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
It configures the secondary IPv6 DNS
server when the IP address mode is
configured as IPv6 or IPv4&IPv6, and
the Internet (WAN) port type for IPv6 is
configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
It configures the PC (LAN) port type.
0-Router
1-Bridge
0 or 1
The default value is 1.
It takes effect after a reboot.
It enables or disables the PC port.
0-Disabled
0 or 1 1-Auto Negotiation
The default value is 1.
It takes effect after a reboot.
It configures the IP address of the PC
(LAN) port when the PC (LAN) port is
configured as Router.
The default value is 10.0.0.1.
It takes effect after a reboot.
It configures the mask of the PC (LAN)
port when the PC (LAN) port is
configured as Router.
The default value is 255.255.255.0.
It takes effect after a reboot.
Descriptions Web Setting Path
Network->Basic->
IPv6 Config->Static
IP Address->
Primary DNS
Network-> Basic->
IPv6 Config->Static
IP Address->
Secondary DNS
Network->PC Port
->PC Port Config
Network->PC Port
->PC Port Active
Network->PC Port
->PC Port Config
->As Router->IP
Address
Network->PC Port
->PC Port Config
->As Router
->Subnet Mask