Yealink SIP-T2 Series Provisioning Manual page 105

Permitted
Parameter
Values
auto_provision
.aes_key_in_fil 0 or 1
e =
autoprovision.
String within
X.name =
64
(X ranges
characters
from 1 to 50)
autoprovision.
X.code =
String
(X ranges
from 1 to 50)
autoprovision.
URL within
X.url =
511
(X ranges
characters
from 1 to 50)
autoprovision. String within
X.user = 64
characters
(X ranges
Descriptions
~ Z, a ~ z.
The default value is blank.
It enables or disables the phone to
decrypt configuration files using the
encrypted AES keys.
0-Disabled
1-Enabled
If it is set to 1, the phone will download
<y0000000000xx_Security>.enc and
<MAC_Security>.enc files during auto
provisioning, and then decrypts these
files into the plaintext keys (e.g., key2,
key3) respectively using the phone
built-in key (e.g., key1). The IP phone
then decrypts the encrypted
configuration files using corresponding
key (e.g., key2, key3).
The default value is 0.
It configures the name of the code for
triggering auto provisioning.
The default value is blank.
It takes effect after a reboot.
It configures the code for triggering
auto provisioning.
Valid characters are digits, # and *.
Example:
autoprovision.1.code = *99
The default value is blank.
It takes effect after a reboot.
It configures the access URL of auto
provisioning server.
The default value is blank.
It takes effect after a reboot.
It configures the user name for
authentication during auto
provisioning.
Appendix
Web Setting Path
95