Yealink SIP-T2 Series Provisioning Manual page 58

Yealink IP Phones Auto provisioning Guide
Scenario Operations II:
1. Add/Edit the following parameters in the y000000000000.cfg file or
001565221229.cfg file you want the phone to download:
#Enable or disable the phone to protect personalized configuration settings even
#after auto provisioning.
#1 – personalized configuration settings via web/phone user interface will be
#protected and remained after auto provisioning;
#0 - personalized configuration settings via web/phone user interface will be
#overridden unconditionally after auto provisioning.
#The default value is 0.
auto_provision.custom.protect=1
#Enable or disable the phone to synchronize personalized configuration settings
#with the auto provisioning server.
#1 - personalized configuration settings via web/phone user interface are saved in
#the MAC-local.cfg file on the phone, and then the phone will upload the
#MAC-local.cfg file to the server. During auto provisioning, the phone requests to
#download the MAC-local.cfg file on the server;
#0 - personalized configuration settings via web/phone user interface are saved in
#the MAC-local.cfg file on the phone, but the phone will not upload the
MAC-local.cfg file to the server. The phone does not request to download the
MAC-local.cfg file on the server during auto provisioning.
#The default value is 0.
auto_provision.custom.sync=0
2. Move the configuration files (y000000000000.cfg, 001565221229.cfg) that you want
the phone to download to the new directory "ProvisioningDir_new" of the
provisioning server.
3. Create a blank configuration file "y000000000000.cfg" on the root directory of the
provisioning server and add the following parameters to this file.
#Configure the access URL of the firmware file.
firmware.url = tftp://192.168.1.211/2.72.0.30.rom
#Configure the access URL of configuration files.
auto_provision.server.url = tftp://192.168.1.211/ProvisioningDir_new
If your IP phone is running firmware version prior to 61, the phone can only recognize the
old (M1) configuration file for auto provisioning, so the blank configuration file created
above uses the M1 template.
4. Reboot the phone to trigger auto provisioning process. For more information on how
to trigger auto provisioning process, refer to
48
Update Mode on Page 37.