Yealink SIP-T2 Series Provisioning Manual page 164

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
features.blf_lis
t_version =
features.voice
_mail_tone_en
able =
multicast.code
c =
multicast.recei
ve_priority.en
able =
multicast.recei
Integer from
ve_priority.pri
ority =
154
Values
The default value is 0.
Note: The old parameter
"features.blf_and_callpark_idle_led_e
nable" is also applicable to IP phones.
It enables or disables the phone to
deal with the Version header in the BLF
NOTIFY message sent by the server.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It takes effect after a reboot.
It enables or disables the phone to
play the warning tone when receiving
a voice mail.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
PCMU
PCMA
G729
G722
It configures the codec of multicast
paging.
G726-16
The default value is G722.
G726-24
G726-32
G726-40
G723_53
It enables or disables the phone to
handle the incoming multicast paging
calls when there is a multicast paging
call on the phone.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
It configures the priority of multicast
paging calls.
0 to 10
1 is the highest priority, 10 is the lowest
Descriptions Web Setting Path
Features->General
Information->
Multicast Codec
Directory->
Multicast
IP->Paging Priority
Active
Directory->
Multicast
IP->Paging Barge