Yealink SIP-T2 Series Provisioning Manual page 160

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
phone_setting
.ring_power_l
ed_flash_ena
ble =
phone_setting
.mail_power_l
ed_flash_ena
ble =
phone_setting
.mute_power_l
ed_flash_ena
ble =
150
Values
Note: The old parameter
"features.power_led_on" is also
applicable to IP phones.
It enables or disables the power
indicator LED to flash when the phone
receives an incoming call.
0-Disabled (power indicator LED does
not flash)
1-Enabled (power indicator LED fast
0 or 1 flashes (300ms) green)
The default value is 1.
If it is set to 0, the status of the power
indicator LED is determined by the
value of the parameter
"phone_setting.common_power_led_e
nable".
It enables or disables the power
indicator LED to flash when the phone
receives a voice mail or a text
message.
0-Disabled (power indicator LED does
not flash)
1-Enabled (power indicator LED slow
0 or 1
flashes (1000ms) green)
The default value is 0.
If it is set to 0, the status of the power
indicator LED is determined by the
value of the parameter
"phone_setting.common_power_led_e
nable".
It enables or disables the power
indicator LED to flash when a call is
mute.
0-Disabled (power indicator LED does
0 or 1
not flash)
1-Enabled (power indicator LED fast
flashes (300ms) green)
The default value is 1.
Descriptions Web Setting Path
Features->Power
LED->Ring Power
Light Flash
Features->Power
LED->Voice/Text
Mail Power Light
Flash
Features->Power
LED->Mute Power
Light On