PRIMEQUEST 1000 Series Installation Manual
CHAPTER 7 Work after Installation
7.5.2
Configuring SNMP
Configure SNMP (Simple Network Management Protocol). Use Administrator privileges to configure SNMP.
Set whether to report any operational failure to an external destination, the notification destination, and other
information. You can make the following four types of setting:
Enabling SNMP
Making advanced SNMP settings
Setting SNMP trap destinations
Configuring SNMP v3
Enabling SNMP
Operations
1. Click [Network Configuration] - [Network Protocols].
The [Network Protocols] window appears. For details on the [Network Protocols] window, see 1.5.4
[Network Protocols] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
FIGURE 7.6 [Network Protocols] window (example)
2. Enter values for each item in [SNMP].
3. Click the [Apply] button.
Making advanced SNMP settings
Operations
1. Click [Network Configuration] - [SNMP Configuration] - [Community].
216
C122-E107-09EN