Figure 4.2 Example Of Display Of The [Change Boot Order] Menu - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 4 Installing the Operating System and Bundled Software
- Specify [UEFI: DVD/CD 0] as the highest priority device to boot from the remote storage DVD.
- Specify [UEFI: Embedded DVD/CD] as the highest priority device to boot from the built-in
DVD.
For details on how to set the boot order, see Changing the order of priority (Change Boot Order) in
5.6.1 [Boot Options] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).

FIGURE 4.2 Example of display of the [Change Boot Order] menu

The following describes the meaning of the menu:
- UEFI: DVD/CD n (n=0, 1, 2...)
Specify this when starting the UEFI-aware OS from the external DVD/CD drive media.
The n in "UEFI: DVD/CD n" is a sequential number (starting from 0) assigned in the order that
DVD/CD devices are recognized. The assigned number remains stored based on the connection
location information as long as the device is not disconnected from the system.
- UEFI: Embedded DVD/CD:
Specify this item when using the built-in DVD drive for installation in UEFI mode.
- UEFI Shell:
Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI
Shell.
- Legacy Boot:
Specify this item for BIOS mode. Also specify [Legacy Boot] when using the built-in DVD drive
for installation in BIOS mode.
3. Specify [Commit Changes and Exit] - [Reset System] to reboot the partition.
3. After a moment, the language selection window appears. Select [English] for installation in English.
4. Click the [Next] button on the initially displayed window without setting anything.
5. Select [Deployment] in the [Welcome to ServerView Installation Manager] window.
6. Select an installation mode and the operating system to be installed. Then, set up the operating system.
69 C122-E107-09EN