Configuring A Software Watchdog; Completing Vmware Installation - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 4 Installing the Operating System and Bundled Software
5. Configure the default gateway. For details, see
6. Retrieve VMware PSA maintenance information. For details, see
maintenance information.
7. Install updates of PSA and other bundled software.
Check the latest versions of the software at their download sites, and install the necessary updates. For details
on PSA, see 6.2.9 Installing a PSA
4.7.6

Configuring a software watchdog

Remarks
If you use SVOM 5.0, see
1. Start ServerView Operations Manager.
2. Select [ServerList].
3. Right-click the target partition in the server list on the left side. Select [Maintenance] - [ASR Properties] from
the displayed menu.
4. Select [Watchdog] in the displayed window.
5. Specify the following for [Software], and click [Apply].
- Check the [Active] check box.
- Select [Continue] for [Action] for cases of abnormal operation.
- Enter a value between 1 and 100 minutes for [Timeout].
6. Enter your user name and password, and press the [Enter] key.
4.7.7

Completing VMware installation

After completing the settings, reboot the partition of the PRIMEQUEST 1000 series server.
update.
When using SVOM 5.0 or later
E.4.3 Configuring the default
E.4.4 Retrieving VMware 4.x PSA
in E.2 Notes on VMware 4.x
96
gateway.
Installation.
C122-E107-09EN