Figure 6.19 New Outbound Rule Wizard - Protocol And Ports; Table 6.13 [Protocol And Ports] Setting Items; Table 6.14 [Scope] Setting Items - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E)

TABLE 6.13 [Protocol and Ports] setting items

Window item
Protocol type
Local port
Remote port

FIGURE 6.19 New Outbound Rule Wizard - Protocol and Ports

19. The wizard displays the [Scope] window, as indicated at the upper left. Select or enter values for the following
items. Then, click the [Next] button.

TABLE 6.14 [Scope] setting items

Window item
Which local IP addresses does this rule match?
Which remote IP addresses does this rule match? Select [These IP addresses]. Then, click the
Selected or entered value
TCP
All Ports
Select [Specific Ports]. Then, enter 5000 in the
text box below it.
Selected or entered value
Any IP address
[Add] button.
180 C122-E107-09EN