Configuring Snmp Agent - Fujitsu PRIMERGY BX900 User Manual

3.13 Configuring SNMP Agent

This section describes how to configure SNMP agent which informs MIB information of SNMP host.
SNMP host
192.168.1.100
<Configuration target>
Use SNMP agent function
• Administrator
• System name
• Location
• Agent IP address
• SNMP host IP address 192.168.1.100
• community
<Commands>
Configure SNMPagent information
(config)#snmp agent contact suzuki
(config)#snmp agent sysname SBAX2
(config)#snmp agent location 1F
(config)#snmp agent adress 192.168.1.1
Configure SNMPhost information
(config)#snmp manager 0 192.168.1.100 public00 off disable
Enable SNMP agent function
(config)#snmp service on
Save the configuration
(config)#save
lan 0
192.168.1.1
Inform MIB information against
SNMP request
suzuki
SBAX2
1F
192.168.1.1
public00
51 / 95
PRIMERGY 10GbE Connection Blade 18/8 User Guide
Administrator :Suzuki
System name:SBAX2
Agent IP address 192.168.1.1