Battery Unit Service Life Monitoring For A Ups - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E)
6.9.2

Battery unit service life monitoring for a UPS

The battery unit on a UPS is a service life component. RAS Support Service performs service life monitoring.
RAS Support Service sends messages for replacement notification at the following times.
TABLE 6.17 Message for advance notification of replacement and replacement notification message
(UPS)
Start time for sending messages for advance
notification of replacement
After about 1 year and 9 months from the start
of use or replacement of the battery unit
Operations
1. Determine which partitions to set for service life monitoring. Then, start the GUI of RAS Support Service.
- Windows: Log in to the operating system. Start the GUI.
- Linux: Open a Web browser. Access the specified URL. Log in.
For details on operations, see the RAS Support Service User's Guide (for Linux or Windows).
2. The Service Life Component Names list on the RAS Support Service screen displays [UPS (battery)].
Since you can enter a value in the Mounting Dates list, enter the battery unit mounting date in the list.
Notes
Note the following points about battery unit service life monitoring for a UPS in the PRIMEQUEST 1000 series
server.
- If there are multiple partition configurations, set battery unit service life monitoring for a UPS for only one
partition (arbitrary).
Otherwise, advance notifications of replacement will be issued from multiple partitions.
Time for sending replacement
notification message
After about 2 years
201 C122-E107-09EN