Table 4.4 If The Folder Contains Two Files; Table 4.5 If The Folder Contains One File - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 4 Installing the Operating System and Bundled Software
2. Double-click the file in the <DVD drive name>:\HotFixes\SR-IO folder to run it.
- If the folder contains the following two files, select a file according to the Windows type.

TABLE 4.4 If the folder contains two files

OS type
Windows Server 2003 /
R2
Windows Server 2008 /
R2
Windows Server 2012
- If the folder contains one file, it is a common file for Windows.

TABLE 4.5 If the folder contains one file

OS type
Windows Server 2003 /
R2
Windows Server 2008 /
R2
Windows Server 2012
3. Remove the "ServerView Suite DVD1" DVD from the DVD drive.
3. After completing the setting, reboot the unit.
4. Confirm that the PSA management LAN IP address is not the same as the IP address used for the production
network or management network. For details, see
LAN.
Remarks
The PSA management LAN is automatically assigned an IP address. Confirm that the IP address is not the
same as the IP address used for the production network or management network. If the IP addresses are
identical, change the PSA management LAN IP address. Also, if the subnets are identical, change the subnet
setting on the MMB side.
5. Confirm management LAN settings.
1. Confirm the management LAN settings for linkage to higher-layer software, such as Systemwalker.
2. Specify OFF for the STP function of the switch that connects to the management LAN used for
communication with the MMB. (See
6. Set the destinations of traps from the partition.
Name of file to be run (xx: version number)
SR-IO-registry-xx-Win2003.reg
SR-IO-registry-xx-Win2008.reg
- (Registry setting not required)
Name of file to be run (xx: version number)
SR-IO-registry-xx-E0.reg
- (Registry setting not required)
6.3.1 Configuring the PSA-to-MMB communication
6.3.2 Confirming management LAN
79
settings.)
C122-E107-09EN