PRIMEQUEST 1000 Series Installation Manual
CHAPTER 4 Installing the Operating System and Bundled Software
8. Replace the media with the operating system installation media according to the SVIM instructions.
9. Perform the following operation by using the MMB Web-UI.
Remarks
These steps are not required in Windows Server 2012.
1. Click [Partition] - [Partition#x] - [Mode].
2. Check the [Setting OS Installation Mode] check box, and then click the [Apply] button.
3. When the confirmation message appears, click the [OK] button.
After a while, the [Setting Completed] window appears. This completes the setting procedure.
FIGURE 4.8 [Mode] window (example)
Remark
Perform the above procedure at the following times.
1. When the system goes from the [ServerView Installation Manager] window to the [Install Windows] window,
after starting installation with SVIM and rebooting.
85
C122-E107-09EN