Setup Workflow; Work Performed By A Field Engineer; Work Performed By The User; Table 1.1 Work Performed By The User - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 1 Installation Overview
1.1

Setup Workflow

This section describes the workflow for the tasks required to prepare the PRIMEQUEST 1000 series server for
operation.
Setup work consists of tasks performed by a field engineer and other tasks performed by the user.
The setup workflow is described below.
1.1.1

Work performed by a field engineer

A field engineer sets up the unit. This includes the following tasks:
- Checking mounted components
- Preparing for main unit installation
- Checking partitions ... etc.
Remarks
The following tasks need to be completed before the user starts the setup work:
- Unit setup by a field engineer
- MMB setup within the scope of responsibility of the field engineer
- Running test programs ... etc.
1.1.2

Work performed by the user

The user performs the following tasks in the order given.

TABLE 1.1 Work performed by the user

No. Work item
1. Setup
Field engineers perform the following tasks on this product.
Customers must not perform these tasks under any circumstances. Otherwise, electric
shock, injury, or fire may result.
- Newly installing or moving equipment
- Removing the front, rear, and side covers
- Installing and removing built-in options
- Connecting and disconnecting external interface cables
- Maintenance (repair and periodic diagnosis and maintenance)
Work tasks and description
- Initializing partition settings
Perform tasks such as setting partition names and
configuring partitions individually.
- Connecting and configuring the MMB
(operating environment)
- Setting up the connection environment for actual
operation
Set up the MMB connection environment, such
as by setting the IP addresses for actual operation.
3.1.2 Partition settings
3.3.3 Setting up the connection
environment for actual
operation
2
See
C122-E107-09EN