Slide Rail Assembly Notes For Both Servers - Fujitsu Sparc Enterprise T5120 Installation Manual

Slide Rail Assembly Notes for Both
Servers
The rackmounting kit has two slide rail assemblies. A slide rail assembly can be
installed on either the right or left side of the rack.
Note – The slide rail assemblies are different for the T5120 and T5220 servers. The
removable mounting bracket of the SPARC Enterprise T5120 rails slides 13 in. (33 cm)
out of the slide rail, then locks in place. The removable mounting bracket of the
SPARC Enterprise T5220 rails slide 14 in. (35.5 cm) before locking.
Each slide rail assembly consists of a three-section slide rail and a removable
mounting bracket.
Sections of the Slide Rail Assembly on the SPARC Enterprise T5220 Server
FIGURE:
Figure Legend
1 Mounting bracket
2 Front section
3 Middle section
4 Rear section
Preparing for Installation 15