Server Handling Precautions; Input Power Information And Precautions - Fujitsu Sparc Enterprise T5120 Installation Manual

Server Handling Precautions

Caution – Deploy the antitilt bar on the equipment rack before beginning an
installation.
Caution – The SPARC Enterprise T5220 server weighs approximately 55 lb (25. kg).
Two people are required to lift and mount this 2U server into a rack enclosure when
using the procedures in this document.
Caution – When completing a two-person procedure, always communicate your
intentions clearly before, during, and after each step to minimize confusion.
Related Information
"Input Power Information and Precautions" on page 3
■
SPARC Enterprise T5120 and T5220 Servers Getting Started Guide
■
SPARC Enterprise T5120 and T5220 Servers Getting Started Guide (DC)
■
Input Power Information and
Precautions
The SPARC Enterprise T5120 and T5220 servers are available in the following input
power configurations:
Two redundant, hot-swappable AC power supplies
■
Two redundant, DC power supplies
■
Preparing for Installation 3