Installing The Servers In A Rack With Express Rails; To Install The Slide Rail Assemblies - Fujitsu Sparc Enterprise T5120 Installation Manual

Related Information
"Installing the Servers in a Rack With Express Rails" on page 76
■
Installing the Servers in a Rack With
Express Rails
Note – Ensure that you have all of the parts in the rackmounting kit before you
begin installation.
The rackmounting kit contains two slide rail assemblies, which can be installed on
either the right or left side of the rack.
A slide rail assembly consists of two parts, a slide rail and a removable mounting
bracket. The slide rail attaches to the rack posts. The mounting bracket attaches to the
server chassis.
Related Information
"To Install the Slide Rail Assemblies" on page 76
■

▼ To Install the Slide Rail Assemblies

1. Pull both mounting brackets completely out of their respective slide rails.
a. Simultaneously press and hold the upper and lower lock buttons of the slide
76 SPARC Enterprise T5120 and T5220 Servers Installation Guide • July 2009
rail lock.