Slide Rail Assembly Notes; Figure 1-2 Slide Rail Assembly - Fujitsu SPARC Enterprise T1000 Installation Manual

The Solaris OS is preinstalled on the server. When you power on, you are
automatically guided through the Solaris OS configuration procedure. See
Boot the Solaris Operating System" on page
13. Install any required patch or patches to the server.
Refer to the product notes for a list of the required patches.
14. (Optional) Load additional software from the Solaris media kit.
The Solaris media kit (sold separately) includes several CDs containing software
to help you operate, configure, and administer your server. Refer to the
documentation provided with the media kit for a complete listing of included
software and detailed installation instructions.

Slide Rail Assembly Notes

The rackmount kit has two slide rail assemblies. Each slide rail assembly can be
installed on either the right or left side of the rack.
A slide rail assembly consists of three main sections, a front section, a sliding rear
section, and a removable mounting bracket (
includes two extension brackets.
Mounting bracket
(shown removed)
Front section
Slide Rail Assembly
FIGURE 1-2
39.
). The rackmount kit also
FIGURE 1-2
Rear section
Chapter 1 Preparing for Installation
"To
Extension bracket
5