About The Slide Rail Assembly - Fujitsu SPARC Enterprise T5440 Installation And Setup Manual

About the Slide Rail Assembly

The rackmount kit has two slide rail assemblies, one for each side of the rack. Each
slide rail assembly is marked LEFT or RIGHT.
Each slide rail assembly consists of a three-section slide rail and a removable inner
rail (FIGURE: Rackmount Kit Parts on page
Rackmount Kit Parts
FIGURE:
Figure Legend
1
2
3
4
5
The inner slide assembly, front rackmount bracket, and rear rackmount bracket form the
■
slide rail assembly. The inner slide assembly can be extended to allow movement of
the server out of the rack.
Inner rail
Inner slide assembly
Front rackmount bracket
Outer slide assembly
Rear rackmount bracket
7).
Preparing for Installation 7