Fujitsu Sparc Enterprise T5120 Installation Manual page 84

q) NO SELECTION
Enter Selection, q to quit: q
ok
2. Type the boot command at the ok prompt.
Use the value from
target to the disk path.
In the following example, the server is booted from disk 0 (zero) on a SPARC
Enterprise T5120 server.
ok boot disk0
Boot device: /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0
File and args:
Notice: Unimplemented procedure 'encode-unit' in
/pci@7c0/pci@0/pci@2/pci@0/LSILogic,sas@4
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,T5120/ufsboot
Loading: /platform/sun4v/ufsboot
....................
Hostname: hostname
The system is coming up. Please wait.
NIS domain name is x.x.x.x
starting rpc services: rpcbind keyserv ypbind done.
Setting netmask of lo0 to 255.0.0.0
Setting netmask of bge0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4:
gateway xxxx
syslog service starting.
volume management starting.
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
The system is ready.
hostname console login:
Related Information
"To Avoid Booting the Solaris Operating System at Startup" on page 63
■
SPARC Enterprise T5120 and T5220 Servers Administration Guide
■
62 SPARC Enterprise T5120 and T5220 Servers Installation Guide • July 2009
Step 1 to construct the boot command. You must append the