Fujitsu Sparc Enterprise T5120 Installation Manual page 47

Using the Slide Rail Spacing Tool to Adjust the Distance Between the Slide Rails
FIGURE:
(Either Server)
b. Insert the right side of the tool into the front end of the right rail.
c. Slide the end of the rail to the right or left as needed to allow the ends of the
tool to enter the ends of both rails.
The distance between the rails is now equal to the width of the server with
mounting brackets.
d. Tighten the screws to lock the ends of the rails in place.
e. At the rear of the rack, repeat
rails.
Related Information
"To Insert and Lock the Server in the Rack" on page 26
■
Step a through
Installing the SPARC Enterprise T5120 and T5220 Servers
Step d for the rear ends of the
25