To Avoid Booting The Solaris Operating System At Startup; To Reset The System; To Power Cycle The System - Fujitsu Sparc Enterprise T5120 Installation Manual

▼ To Avoid Booting the Solaris Operating
System at Startup
In hard drive HDD0, the Solaris OS is preinstalled.
●
If you do not want to start the preinstalled OS, set the Open Boot PROM
parameter auto-boot? to false. For example:
-> set /HOST/bootmode script="setenv auto-boot? false"
Related Information
"To Reset the System" on page 63
■
SPARC Enterprise T5120 and T5220 Servers Administration Guide
■

▼ To Reset the System

1. If it is necessary to reset the system, use the shutdown -g0 -i6 -y command
# shutdown -g0 -i6 -y
2. It is not necessary to power the system off and on to simply reset the system.
Related Information
"To Power Cycle the System" on page 63
■
SPARC Enterprise T5120 and T5220 Servers Administration Guide
■

▼ To Power Cycle the System

If a simple reset does not clear a system problem, you can power the system off and
on with this procedure.
Powering On the System 63