Fujitsu Sparc Enterprise T5120 Installation Manual page 125

Stripping the Insulation From the Wire
FIGURE:
Figure Legend
1 Strip the insulation 1/2 in., or 13 mm.
5. Open the cage clamp by inserting the cage clamp tool (or small screwdriver)
into the rectangular hole directly above the hole in the DC input plug where
you want to insert the first wire, and push in to open the cage clamp.
Opening the Cage Clamp Using the Cage Clamp Tool
FIGURE:
6. Feed the exposed section of the appropriate wire into the round plug hole in the
DC input plug.
Assembling and Installing DC Power Cables for the SPARC Enterprise T5220 Server 103