To set up remote messaging:
Access your mailbox as described on
software, skip this step.)
Do one of the following.
To program a cascade level: Press
wish to program (1-9). You then have the following options:
— To set up or change an extension or telephone number: Press
— To set up or change a pager number: Press
— To enable or disable the cascade level: Press
To set up time of day for notification: Press
want the message notification to start and stop. Enter the times with two dig-
its for the hour and two digits for the minutes (e.g., 0900 = 9:00). If entering
the time in 12-hour format, you are prompted to press
To set up the days of the week for notification: Press
of the following:
To select all or priority-only message notification: Press
Either select another option, as described above, or press
Model 8500 Phone User Guide
to select the Personal Options Menu. (If using version 5.0 or earlier
This option is not available if you do not have Remote Messaging enabled.
to set up a primary cascade or press
for an extension number or press
Then enter the number.
level until a notification number is programmed.)
For 24-hour notification, program the starting and ending times to be
for all days.
to select individual days. You are prompted to press digits 1-7
which correspond to the days Sunday through Saturday.
for all messages or
to set up an alternate cascade.
and enter the number of the level you
for priority messages only.
for an outside number.
. Then enter the number.
. (You cannot enable the
. Then enter the time you
for AM or
. Then select one
. Then press
to save the settings