If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to phone record reports that the system will periodically
There are three types of account codes:
• Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
• Forced account codes must be dialed before you can place an outside call.
• Optional account codes can be entered at any time during a call.
Your system administrator can tell you which types of account codes are used
on your telephone system.
To enter an optional account code:
Enter the optional account code. If the account code is not immediately accepted,
To set an account code for all calls placed from your phone:
To disable the code:
and then the account code. If the account code is not immediately
. This code will be used for all calls made from your phone until it
Model 8500 Phone User Guide