Table 69: Error Codes Sent To The Management Module - Intel SE7520JR2 Technical Manual

Error Reporting and Handling
Error Code
8130 Processor 01 disabled
8131 Processor 02 disabled
8140 Processor 01 failed FRB-3 timer
8141 Processor 02 failed FRB-3 timer
8150 Processor 01 failed initialization on last boot.
8151 Processor 02 failed initialization on last boot.
8160 Processor 01 unable to apply BIOS update
8161 Processor 02 unable to apply BIOS update
8170 Processor 01 failed BIST
8171 Processor 02 failed BIST
8180 BIOS does not support current stepping for Processor 1
8181 BIOS does not support current stepping for Processor 2
8190 Watchdog timer failed on last boot
8198 OS boot watchdog timer failure
8300 BaseBoard Management Controller failed Self Test
8301 Not enough space in Runtime area!!. SMBIOS data will not be available.
8305 Primary Hot swap Controller failed to function
84F1 BIST failed for all available processors
84F2 BaseBoard Management Controller failed to respond
84F3 BaseBoard Management Controller in Update Mode
84F4 Sensor Data Record Empty
84FF System Event Log Full
8500 Bad or missing memory in slot 3A
8501 Bad or missing memory in slot 2A
8502 Bad or missing memory in slot 1A
8504 Bad or missing memory in slot 3B
8505 Bad or missing memory in slot 2B
8506 Bad or missing memory in slot 1B
8600 Primary & Secondary BIOS ID's don't match.
8601 Override Jumper is set to force boot from lower bank of flash ROM.
8602 WatchDog Timer Expired(Secondary BIOS maybe bad!).
8603 Secondary BIOS CheckSum fail.
The following table indicates error codes that are sent to the Management Module for error
logging as a BMC pass-through command. All commands are of "Error" type. The syntax of
error logging with the management module and SEL is different. The same error is logged
differently in the SEL than with the Management Module.
Error code
161 Bad CMOS Battery
301 Keyboard failure
102 System Board failure ( Timer tick 2 test failure)
106 Diskette Controller Failure
604 Diskette Drive ? failure
163 Time of the day not set
01298000 The BIOS does not support the current stepping of Processor P0
01298001 The BIOS does not support the current stepping of Processor P1
164
Error Message

Table 69: Error Codes Sent to the Management Module

Error messages
C78844-002
Intel® Server Board SE7520JR2
Response
Warning
Warning
Warning
Warning
Warning
Warning
Pause
Pause
Pause
Pause
Pause
Pause
Warning
Pause
Pause
Pause
Pause
Halt
Pause
Pause
Pause
Warning
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Pause
Revision 1.0