Intel SE7520JR2 Technical Manual page 159

Intel® Server Board SE7520JR2
Message Displayed
Secondary Master Drive - ATAPI Incompatible
Secondary Slave Drive - ATAPI Incompatible
rd
3 Master Drive - ATAPI Incompatible
rd
3 Slave Drive - ATAPI Incompatible
th
4 Master Drive - ATAPI Incompatible
th
4 Slave Drive - ATAPI Incompatible
th
5 Master Drive - ATAPI Incompatible
th
5 Slave Drive - ATAPI Incompatible
th
6 Master Drive - ATAPI Incompatible
th
6 Slave Drive - ATAPI Incompatible
S.M.A.R.T. Capable but Command Failed
S.M.A.R.T. Command Failed
S.M.A.R.T. Status BAD, Backup and Replace
S.M.A.R.T. Capable and Status BAD
Revision 1.0
Description
configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Secondary Master
failed an ATAPI compatibility test. This message is
typically displayed when the BIOS is trying to detect and
configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Secondary Slave
failed an ATAPI compatibility test. This message is
typically displayed when the BIOS is trying to detect and
configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Master in the 3
IDE controller failed an ATAPI compatibility test. This
message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Slave in the 3
controller failed an ATAPI compatibility test. This
message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Master in the 4
IDE controller failed an ATAPI compatibility test. This
message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Slave in the 4
controller failed an ATAPI compatibility test. This
message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Master in the 5
IDE controller failed an ATAPI compatibility test. This
message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Slave in the 5
controller failed an ATAPI compatibility test. This
message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Master in the 6
IDE controller failed an ATAPI compatibility test. This
message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
The IDE/ATAPI device configured as Slave in the 6
controller failed an ATAPI compatibility test. This
message is typically displayed when the BIOS is trying to
detect and configure IDE/ATAPI devices in POST.
The BIOS tried to send a S.M.A.R.T. message to a hard
disk, but the command transaction failed.
This message can be reported by an ATAPI device using
the S.M.A.R.T. error reporting standard. S.M.A.R.T.
failure messages may indicate the need to replace the
hard disk.
The BIOS tried to send a S.M.A.R.T. message to a hard
disk, but the command transaction failed.
This message can be reported by an ATAPI device using
the S.M.A.R.T. error reporting standard. S.M.A.R.T.
failure messages may indicate the need to replace the
hard disk.
A S.M.A.R.T. capable hard disk sends this message
when it detects an imminent failure.
This message can be reported by an ATAPI device using
the S.M.A.R.T. error reporting standard. S.M.A.R.T.
failure messages may indicate the need to replace the
hard disk.
A S.M.A.R.T. capable hard disk sends this message
C78844-002
Error Reporting and Handling
rd
rd
IDE
th
th
IDE
th
th
IDE
th
th
IDE
159