Intel SE7520JR2 Technical Manual page 120

Platform Management
• Platform Event Filtering (PEF)
• Keyboard Controller Style (KCS) IPMI-System Interface (Professional and Advanced
systems only)
• SMBus IPMI-System Interface (On-board Platform Instrumentation systems only)
• Intelligent Chassis Management Bus (ICMB) support (Professional and Advanced
systems only)
• Remote Boot Control
• Local and Remote Power On/Off/Reset Control
•
Local and Remote Diagnostic Interrupt (NMI) Control
• Fault-Resilient Booting
•
Control Panel LED Control
• Platform Management Interrupt Routing (Professional and Advanced systems only)
•
Power Distribution Board (PDB) monitoring (Professional and Advanced systems only)
• Updateable BMC Firmware
•
System Management Power Control (including providing Sleep/Wake and power push-
button interfaces)
• Platform Event Filtering (PEF)
• Baseboard Fan Speed Control and Failure Monitoring
• Speaker 'Beep' Capability (used to indicate conditions such as FRB failure)
(Professional and Advanced systems only)
• Baseboard FRU Information interface
•
Diagnostic Interrupt (Control Panel NMI) Handling
• SMI/NMI status monitor (Professional and Advanced systems only)
•
System interface to the IPMB (via System Interface Ports) (Professional and Advanced
systems only)
• System interface to the PCI SMBus (via System Interface Ports) (Professional and
Advanced systems only)
• Secure Mode Control - front panel lock/unlock initiation.
•
IPMI v2.0 Management Controller Initialization Agent function (Professional and
Advanced systems only)
• Emergency Management Port (EMP) Serial/Modem platform management interface
(Professional and Advanced systems only)
• Dedicated Network Interface Controller (NIC) and full TCP/IP software stack (Advanced
systems only)
120
C78844-002
Intel® Server Board SE7520JR2
Revision 1.0