Boot Block Error Beep Codes; Bmc Generated Beep Codes (Professional/Advanced Only); Table 71: Troubleshooting Bios Beep Codes; Table 72: Boot Block Error Beep Codes - Intel SE7520JR2 Technical Manual

Server board technical product specification
Table of Contents

Advertisement

Error Reporting and Handling
Number of Beeps
1, 2 or 3
Reseat the memory, or replace with known good modules.
4-7, 9-11
Fatal error indicating a serious problem with the system. Consult your system manufacturer.
Before declaring the motherboard beyond all hope, eliminate the possibility of interference by a
malfunctioning add-in card. Remove all expansion cards except the video adapter.
If the beep codes are generated even when all other expansion cards are absent, the
motherboard has a serious problem. Consult your system manufacturer.
If the beep codes are not generated when all other expansion cards are absent, one of the add-
in cards is causing the malfunction. Insert the cards back into the system one at a time until the
problem happens again. This will reveal the malfunctioning add-in card.
8
If the system video adapter is an add-in card, replace or reseat the video adapter. If the video
adapter is an integrated part of the system board, the board may be faulty.
6.4.4

Boot Block Error Beep Codes

The following table defines beep codes that may occur if a failure occurs while performing a
BIOS Boot Block Update.
Number of Beeps
1
2
3
4
5
6
7
8
9
10
11
12
13
1 long beep
6.4.5

BMC Generated Beep Codes (Professional/Advanced only)

The Sahalee BMC generates beep codes upon detection of the failure conditions listed in the
following table. Each digit in the code is represented by a sequence of beeps whose count is
equal to the digit.
166

Table 71: Troubleshooting BIOS Beep Codes

Table 72: Boot Block Error Beep Codes

Insert diskette in floppy drive A:
'AMIBOOT.ROM' file not found in root directory of diskette in A:
Base Memory error
Flash Programming successful
Floppy read error
Keyboard controller BAT command failed
No Flash EPROM detected
Floppy controller failure
Boot Block BIOS checksum error
Flash Erase error
Flash Program error
'AMIBOOT.ROM' file size error
BIOS ROM image mismatch (file layout does not match image present in flash device)
Insert diskette with AMIBOOT.001 File for Multi-Disk Recovery
C78844-002
Intel® Server Board SE7520JR2
Troubleshooting Action
Description
Revision 1.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se7520jr2atad2

Table of Contents