Table 27: Bios Setup, Usb Configuration Sub-Menu Selections; Table 28: Bios Setup, Usb Mass Storage Device Configuration Sub-Menu Selections - Intel SE7520JR2 Technical Manual

System BIOS
4.4.2.2.5 USB Configuration Sub-menu

Table 27: BIOS Setup, USB Configuration Sub-menu Selections

Feature
USB Configuration
USB Devices N/A
Enabled
USB Function Disabled
Enabled
Legacy USB Support Disabled
Keyboard only
Auto
Keyboard and Mouse
Port 60/64 Emulation
Disabled
Enabled
USB 2.0 Controller Disabled
Enabled
USB 2.0 Controller FullSpeed
mode HiSpeed
USB Mass Storage N/A
Device Configuration
a. USB Mass Storage Device Configuration Sub-menu

Table 28: BIOS Setup, USB Mass Storage Device Configuration Sub-menu Selections

Feature
USB Mass Storage Device Configuration
USB Mass Storage 10 Sec
Reset Delay 20 Sec
30 Sec
40 Sec
Device #1 N/A
Emulation Type Auto
Floppy
Forced FDD
Hard Disk
CDROM
92
Options
N/A
Enables USB HOST controllers.
Enables support for legacy USB. AUTO option
disables legacy support if no USB devices are
connected. If disabled, USB Legacy Support will
not be disabled until booting an OS.
Enables I/O port 60/64h emulation support.
This should be enabled for the complete USB
keyboard legacy support for non-USB aware
OSes.
N/A
Configures the USB 2.0 controller in HiSpeed
(480Mbps) or FullSpeed (12Mbps).
Configure the USB Mass Storage Class
Devices.
Options
Number of seconds POST waits for the USB
mass storage device after start unit command.
N/A
If Auto, USB devices less than 530MB will be
emulated as Floppy and remaining as hard drive.
Forced FDD option can be used to force a HDD
formatted drive to boot as FDD (Ex. ZIP drive).
C78844-002
Intel® Server Board SE7520JR2
Help Text
Help Text
Description
List of USB
devices detected
by BIOS.
When set to
disabled, other
USB options are
grayed out.
Selects submenu
with USB Device
enable.
Description
Only displayed if a device
is detected, includes a
DeviceID string returned
by the USB device.
Revision 1.0