Peripheral Configuration - NEC N8400-086F User Manual

4-10 Configuring Your Server

Peripheral Configuration

IMPORTANT:
overlapped with others. If the value set for the interrupt or base I/O
address is used in another resource, the yellow asterisk (*) appears.
Reset any item with the yellow asterisk properly.
Option
Serial Port B
Base I/O
address
Interrupt
Note that the interrupt and/or base I/O address are not
Parameter Description
Disabled Selects whether serial port B is enabled or
[Enabled] disabled.
3F8h Selects the base I/O address for serial port
[2F8h] A.
3E8h
2E8h
[IRQ 3] Selects the interrupt for a serial port A.
IRQ 4
Your Setting
[ ]: Factory-set