Peripheral Configuration Submenu - NEC EXPRESS5800/180Ra-7 User Manual

Peripheral Configuration Submenu

Feature
Serial Port 1:
(COM 1)
Serial Port 2:
(COM 2)
Parallel Port
Parallel Mode
Diskette Controller
Mouse
SCSI Controller
LAN Controller
USB Controller
Choices or
Display Only Description
Disabled Disables serial port 1 or
3F8, IRQ3 selects the base address and
3F8, IRQ4
interrupt (IRQ) for serial port 1.
2F8, IRQ3
2F8, IRQ4
3E8, IRQ3
3E8, IRQ4
2E8, IRQ3
2E8, IRQ4
Auto
Disabled Disables serial port 2 or
3F8, IRQ3 selects the base address and
3F8, IRQ4 interrupt (IRQ) for serial port 2.
2F8, IRQ3
2F8, IRQ4
3E8, IRQ3
3E8, IRQ4
2E8, IRQ3
2E8, IRQ4
Auto
Disabled Disables the parallel port or
378, IRQ5 selects the base address and
378, IRQ7
interrupt (IRQ) for the Parallel
278, IRQ5 port.
278, IRQ7
3BC, IRQ5
3BC, IRQ7
Auto
Output only Selects the parallel port
Bi-directional operation mode.
EPP
ECP
ECP, DMA1
ECP, DMA3
Disabled Configure using these options:
Enabled (Disabled) No configuration.
(Enabled) User configuration
Disabled Disabled prevents any
Enabled installed PS/2 mouse from
Auto Detect
functioning, but frees up
IRQ12.
Enabled forces the PS/2
mouse port to be enabled
regardless if a mouse is
present.
Auto Detect enables the PS/2
mouse only if present.
OS Controlled is displayed
only if the OS controls the
mouse.
Disabled Disables or enables on-board
Enabled
SCSI controller.
Disabled Disables or enables on-board
Enabled LAN controller.
Disabled Disables or enables on-board
Enabled USB controller.
Your Setting
Configuring Your System 3-9