Copying Files Between 2 Bht Units - Denso BHT-904BB User Manual

4.5.5 Copying Files between 2 BHT Units

Copy "all files (excluding font files)", "setting data", and the "date and time" stored in the BHT user area to
another BHT.
Use the following procedure to copy files between 2 BHT units.
1.
Set the same interface at both BHT units.
An IrDA communication (Optical) interface is used.
The default interface is set to infrared communication (Optical).
2.
Set "COMMUNICATION PROTOCOL OPTION" → "FIELD SPACE" (space at the end of the
field) to "Ignore" at both BHT units.
The default setting is "Ignore".
Refer to "4.5.6 [5] System Environment Settings (SET SYSTEM Menu)" when changing the interface.
3.
Place the IrDA communication ports of the BHTs face-to-face.
4.
Select "2: DOWNLOAD" → "2: HT<-->HT COPY" at the SYSTEM MENU of the BHT that is
downloading to await downloading.
Refer to "4.5.3 Downloading Files (DOWNLOAD Menu)" for details.
When copying only the system parameter file, use the SYSTEM PARAMETER transfer menu. Refer to
"4.5.13 Downloading/Uploading the BHT System Parameter File (SYSTEM PARAMETER Menu)" for
details.
5.
Select "3: UPLOAD" → "3: HT<-->HT COPY" at the SYSTEM MENU of the BHT that is
uploading to await uploading.
Refer to the "4.5.4 Uploading Files (UPLOAD Menu)" for details.
When copying only the system parameter file, use the SYSTEM PARAMETER transfer menu. Refer to
"4.5.13 Downloading/Uploading the BHT System Parameter File (SYSTEM PARAMETER Menu)" for
details.
6.
Preparation at both BHT units is now complete and file copying will be commenced.
Barcode Handy Terminal
61