Flag 9 - Time Setting; Extended Flags Programming; Flag 8 - Limit And Value Of The Percent Discount; Flag 10 - Date Setting - ELCOM Euro-2100 User Manual

© Elcom, s. r. o.
Figure 3.8 >
Eighth system
flag values..
Figure 3.9 >
Ninth system
flag values..
Figure 3.10 >
Tenth system
flag values..
figure 3.11 >
Extended
flags values
22

Flag 8 - Limit and value of the percent discount

You can shift from limit to value programming by pressing the
rectional arrow shows either limit or value, whichever is actually programmed.
Digit Default Meaning
setting
Left 00 Limit for the percent discount entered du-
ring sale (00 – 99)
Right 0000 Programmed percent discount value (to set
value of 15 enter 1 5 0 0)

Flag 9 - Time setting

Digit D e f a u l t Meaning
setting
1 & 2 12 Hours setting
3 & 4 00 Minutes setting

Flag 10 - Date setting

The cash register handles leap years and adjusts the number of days in each month automatically.
Digit Default set-
ting
1 & 2 01
3 & 4 01
5 & 6 01

Extended flags programming

In the programming mode select the bar-code flags programming by pressing  (Credit).
Digit Default setting Meaning
1 0
2 0
3 0
4 0
5 0
Euro-2100
Meaning
Day
Month
Year
Look-up algorithm for PLUs when reading
18-digit long bar-code
Look-up algorithm for PLUs when reading
15-digit long bar-code
Printing format and storage format in PC
journal if ECR reads and successfully looks
up the 13+5 bar-code
Printing format and storage format in PC
journal if ECR reads and successfully looks
up the 13+2 bar-code
Printing format and storage format in PC
journal if ECR reads and successfully looks
up bar-code with other length than 15/18
or if a PLU has been read using the PLU
number that has length 15/18 and ECR
database contains the same EAN code with
given length (i. e. it is not considered an
EAN 13+2/13+5 code)
Programming manual

(Subtotal) button. The di-
Valid values
00–99
0000–9999
Valid values
00–23
00–59
Valid values
01–31
01–12
00–99
Valid values
0 – look-up using the entire
bar-code, 1 – as option 0, but
if look-up fails, the bar-code
is considered EAN 13+5 and
look-up ignores extension
0 – look-up using the entire
bar-code, 1 – as option 0, but
if look-up fails, the bar-code
is considered EAN 13+2 and
look-up ignores extension
0 – do not store and print
anything, 1 – print and store
only bar-code extension,
2 – print and store entire bar-
code
0 – do not store and print
anything, 1 – print and store
entire 18-digit long code
programmed
for given PLU