Recording Duration - Sanyo DSR-5016 Instruction Manual

3 RECORD SET
Setting audio recording
Audio can be recorded together with images during alarm
recording. Note, however, that since this audio data is also
stored in the recording area, the recording time for this area
decreases.
6
Set "AUDIO RECORDING".
[Settings] ( indicates default setting)
Setting
OFF Audio is not recorded.
ON Audio is recorded.
Audio recording can be enabled when the recording rate is
between A60 and A1 FPS.
Setting the alarm interleave
7
Set "ALARM INTERLEAVE" to the
desired recording pattern.
[Settings] ( indicates default setting)
Setting
Video is recorded only from cameras with an alarm
ONLY
occurring.
Recording is switched between video from a
SW camera for which an alarm has occurred and video
from all connected cameras.
8
Set "REC RATE" to the desired
recording rate.
[Settings] ( indicates default setting)
Setting
A60, A30, A20, A15,
A10, A7.5, A6, A5, A4.286,
A3.75, A3.333, A3, A2.727,
A2.308, A2, A1.667,
A1.429, A1.25, A1.111, A1
0.5, 0.333, 0.25, 0.2, 0.1,
0.05, 0.033
The letter "A" is displayed in front of recording rates that can
be set for audio recording.
When only one camera is connected, recording is
performed at 30 FPS even if 60 FPS is set.
When two or more cameras are connected and 60 FPS is
set, the actual recording rate is roughly the recording rate
divided by the number of cameras. (Example: When 6
cameras are connected and the recording rate setting is 60
FPS, the actual recording rate is 10 FPS)
English
Description
Description
Description
Recording is performed at the
selected recording rate (unit:
FPS). (Audio can be recorded.)
Recording is performed at the
selected recording rate (unit:
FPS). (Audio cannot be recorded.)
9
Set "DURATION" to the desired alarm

recording duration.

[Settings] ( indicates default setting)
Setting
5SEC, 10SEC, 20SEC,
40SEC, 1MIN, 2MIN, 3MIN,
4MIN, 5MIN, 10MIN, 15MIN
CC
Setting pre-alarm recording.
Use the following procedure to set the recording conditions to
be used for pre-alarm. ( P.162)
10
Set "PRE-ALARM RECORDING" to
"ON" or "OFF".
[Settings] ( indicates default setting)
Setting
OFF Pre-alarm recording is disabled.
ON Pre-alarm recording is enabled.
If "ALARM RECORDING" is set to "OFF", the PRE-ALARM
RECORDING setting is displayed as "**" and cannot be
set.
11
Set "REC RATE" to the desired
recording rate.
[Settings] ( indicates default setting)
Setting
A60, A30, A20, A15,
A10, A7.5, A6, A5, A4.286,
A3.75, A3.333, A3, A2.727,
A2.308, A2, A1.667,
A1.429, A1.25, A1.111, A1
The letter "A" is displayed in front of recording rates that can
be set for audio recording.
187
Description
Records for the set duration for
each alarm.
Records while an alarm is
activated (Recording continues
for five seconds even if less than
five seconds).
Description
Description
Recording is performed at the
selected recording rate (unit:
FPS).