Setting Display For Video Loss - Sanyo DSR-5016 Instruction Manual

3 GENERAL SET
A maximum of 9,999,999 alarms can be displayed in the
operation display. When this number is exceeded, the
alarm count returns to 0000000.
When "ALARM RECORDING" is set to "OFF" on the
<ALARM REC MODE SET> screen, the number of alarms
and type of alarm recording are not displayed.
When "ALARM RECORDING" is set to "ENABLED" on the
<ALARM REC MODE SET> screen, the operation display
changes as follows.
"ALARM" is displayed when alarm video is recorded or
played back.
"PRE" is displayed when pre-alarm video is recorded or
played back.
"ARCHIV" is displayed when video is played back from
the archive area.

Setting display for video loss

Use the following procedure to display "VIDEO LOSS" when
the camera video is interrupted.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
MENU
2
Turn the jog dial to select "3.GENERAL
SET" and then turn the shuttle dial
clockwise.
The <GENERAL SET> screen is displayed.
3
Turn the jog dial to select "1.DISPLAY
SET" and then turn the shuttle dial
clockwise.
The <DISPLAY SET> screen is displayed.
<DISPLAY SET>
DATE : ON
TIME : ON
QUALITY : ON
AUDIO : ON
ALARM COUNT : ON
ALARM TYPE : ON
TITLE : ON
VIDEO LOSS : ON
108
4
Turn the jog dial to select "VIDEO
LOSS" and then turn the shuttle dial
clockwise.
"ON" flashes for "VIDEO LOSS".
5
Turn the jog dial to select "ON" or
"OFF" and then turn the shuttle dial
clockwise.
6
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
EXIT/OSD
After video loss is detected, the setting can be cancelled by
performing either of the following:
(1) Input the video signal.
(2) If no video input is required, use a [CAMERA SELECT]
button to select the camera for which video loss was
detected and then press the same button for
approximately 3 seconds.
<DISPLAY SET>
DATE : ON
TIME : ON
QUALITY : ON
AUDIO : ON
ALARM COUNT : ON
ALARM TYPE : ON
TITLE : ON
VIDEO LOSS : ON
<DISPLAY SET>
DATE : ON
TIME : ON
QUALITY : ON
AUDIO : ON
ALARM COUNT : ON
ALARM TYPE : ON
TITLE : ON
VIDEO LOSS : ON
English